Contact Us

Ice Beauty Nail Manufacturing Ltd

Address:401 Commercial Building, No.1105 Zhongshan Avenue Tianhe District, Guangzhou, China




Home > News > Content
LED UV Nail Lamp Use Method Jun 22, 2017

LED ultraviolet light nail lamp principle: the use of methylphenol gel in the light effect of solidification glue in the ultraviolet radiation will occur under the principle of curing reaction, nail light is actually the UV lamp. Nickel lamp used in the UV lamp wavelength is generally 320-400nm, LED UV Nail Lamp is a long wave of ultraviolet light range, will not cause serious damage to the skin

In the nail process can improve the light curing gel or nail oil drying curing speed.

LED UV nail lamp use:

1. On the power outlet, set the O / I switch to the position of I.

2. Put the hand or foot into the body, LED UV Nail Lamp according to the requirements set time, from 30 seconds -180 seconds.

3. When the time is over, the UV lamp will turn off automatically.

4. Please remove the bottom when replacing the lamp and cleaning the inside of the lamp.

5. The bottom plate can be pulled out.

LED UV Nail Lamp Voltage stability, safety, easy to heat, power consumption is small. But it is more than electronic ballasts nail lights to heavy, because there are two inductors, the quality is very heavy, not so easy to carry, low voltage can not start. Nail art is a new product derived from the nail industry, LED UV Nail Lamp the domestic nail market is getting better and better, all kinds of chain nail shop also came into being, brought another development of the production chain.